Up Mode:
• Reset - Press and hold the cancel key to reset the timer if needed, then press the Roller button.
• Thr. pos - Turn the Roller button to change the throttle trigger point.
• Press and hold the Roller button to save and exit, or press the cancel key to exit without saving.
Down Mode:
• Reset - Press and hold the cancel key to reset the timer if needed, then press the Roller button.
• Thr. pos - Turn the Roller button to change the throttle trigger point.
• Set up -Turn the Roller button to set the time in min. and sec.
• Press and hold the Roller button to save and exit, or press the cancel key to exit without saving.
Down / Up Mode:
• Reset - Press and hold the cancel key to reset the timer if needed, then press the Roller button.
• Thr. pos - Turn the Roller button to change the throttle trigger point.
• Set up -Turn the Roller button to set the time in min. and sec.
• Press and hold the Roller button to save and exit, or press the cancel key to exit without saving.
4.Multi Timer
Timer
+Multi. timer
Mode
Timer state
Reset
==>
Up
Stop
00=00
Mode - Turn the Roller button to select a mode (Up, Down, Down then up).
Up Mode:
• Timer State -Turn the Roller button to select "Stop" or "Run". If "Run" is selected, the timer is
counting up.
• Reset - Press and hold the cancel key to reset the timer if needed, then press the Roller button
• Enable Switch-Turn the Roller Button to enable the switch 1 to 8 or None to position up,
middle or down.
• Reset Switch-Turn the Roller Button to reset the switch 1 to 8 or None to position up, middle or
down.
• Press and hold the Roller button to save and exit, or press the cancel key to exit without saving.
Down Mode:
• Timer State -Turn the Roller button to select "Stop" or "Run". If "Run" is selected, the timer is
counting down.
• Reset - Press and hold the cancel key to reset the timer if needed, then press the Roller button.
• Set up-Turn the Roller button to set the time in min. and sec.
• Enable Switch -Turn the Roller Button to enable the switch 1 to 8 or None to position up,
middle or down.
•••••••••••7x
1a
=
ID CHANNEL TRANSMITTER
12
�
�
'"""'
I
DICITALPRDPDRTIDNAL PRDCRAMMABLE
�I
•--=:: �
"-'
.,. �
�
J
RADIDCDNTADL SYSTEM
��®
Summary of Contents for ORX TX10i
Page 1: ...21cm...
