8
ENGLISH
MOUNTING THE RUDDER
❏
1. 18mm from the bottom of the rudder, drill a 2mm hole
for the tail gear. Make a small groove from the hole to the
bottom of the rudder.
❏
2. Remove the film from the border of the groove to have
area for gluing.
❏
3. Now assemble the tailgear like in the picture below.
❏
2. Put a servo extension cable (300-350mm) to the
elevatorservo and fix the connectors with shrinking tube or
adhesive tape.
❏
3. Remove the film on the left side of the fuselage from the
servoframe. Place the servo and drill 1,5mm holes for screws.
Screw the servo on the fuselage.
❏
4. Mount the pushrod carrier into the flap lever. Use blue
locking agent for all screws and look for good movement of
the carrier. Hook the rod into the servolever and put it through
the hole of the carrier. Bring servolever and flap into neutral
position and fix the clamp screw of the carrier.
Always take
care of smoothly mobility of the flap!
Summary of Contents for Edge 540 RB FLWA4140
Page 15: ...15 ENGLISH NOTES...
