11
ENGLISH
❏
4. Bring the motor cowl in the correct position. Check the
position with the spinner base plate. There should be a gap of
2mm between the cowling and the spinner. Fix the cowl with
tapes in this position.
❏
5. The cowling should overhang the firewall frame for
about 10mm. Then the position is OK.
❏
6. Drill on both sides 1,5mm holes through the cowling
and through the wood of the fuselage. You can stiff out the
hole in the wood, using thin CA-glue. Then you can mount
the cowling with 4 pcs of 2.3x8 wood screws. Do not install
the propeller and the spinner, until all radio adjustments are
finished. So the propeller cannot make any damage or hurts, if
somethging goes wrong during RC adjustment.
INSTALLING THE MOTOR
❏
1. Screw the prop adapter and the aluminium cross to the
motor. Use blue thread lock.
❏
2. Screw the motor with 4 pcs of M4x20 screws and the
12mm distance rolls against the firewall frame. Also use thread
lock for this connection. The motor cables should be place on
left side.
❏
3. The ESC can be fixed inside on the left side of the
fuselage, using a doublesided adhesive tape or a cable tie..
Summary of Contents for Edge 540 RB FLWA4140
Page 15: ...15 ENGLISH NOTES...
