HNP Mikrosysteme mzr-11507 Operation Manual Download

Page: 51 / 55

16 Legal information

Operating manual mzr-11507

Last update: August 2016

Technical data subject to change without prior notice!

Legal information

Marks

mzr

is a registered German trademark of HNP Mikrosysteme GmbH.

MoDoS

is a registered German trademark of HNP Mikrosysteme GmbH.

µ-Clamp

is a registered German trademark of HNP Mikrosysteme GmbH.

HNPM

is a registered German trademark of HNP Mikrosysteme GmbH.

Teflon

is a registered trademark of DuPont.

Viton

is a registered trademark of DuPont Dow Elastomers.

Kalrez

Spectrum™ is a registered trademark of DuPont.

PEEK™ is a registered trademark of Victrex plc.

HASTELLOY

is a registered trademark of Haynes International, Inc.

Aflas

is a registered trademark of ASAHI Glass Ltd.

Microsoft

, Windows

are registered trademarks of Microsoft Corporation in

the USA and in the other countries.

Cavro

is a registered trademark of Tecan Systems, Inc.

Other product names or descriptions not mentioned above are possibly

registered trademarks of related companies.

Patents

Micro annular gear pumps (and housings) are protected by assigned patents:

EP 1115979 B1, US 6,520,757 B1, EP 852674 B1, US 6,179,596 B1,

EP 1354135, US 7,698,818 B2. Patents pending DE 10 2011 001 041.6,

PCT/IB2011/055108, EP 11 81 3388.3, US 13/884,088, CN 2011 8006 5051.7,

HK 13 11 2934.9, DE 10 2011 051 486.4, PCT/EP2012/061514,

EP 12 728264.8, US 9,404,492 B2, CN 2012 8003 8326.2. In the US, Europe

and China additional patents are pending.

Summary of Contents for mzr-11507
























































Search results

Summary of Contents for mzr-11507

Reviews:

Related manuals for mzr-11507

Brands by name

Popular brands

HNP Mikrosysteme mzr-11507, Operation Manual

Search results

Summary of Contents for mzr-11507

Reviews:

Related manuals for mzr-11507

Brands by name

Popular brands