10
If you have upgraded to this edition of Radwin from an earlier version, then the
database format that was chosen in the previous edition will be maintained.
Setting up the communications cable
Note: The following instructions assume the use of the USB IR Reader connected to a PC
USB port (with or without USB /Serial connector) or a Serial IR Reader connected to a PC
serial port.
1. Connect the USB plug to a spare USB port on your computer or the Serial plug to a
spare Serial port on your computer.
2. Position the reader head on the logger as shown below
Take care to position the head over raised ring area around the window. The reader
head will hold onto the logger by magnets in the ring around the window and this
helps with positioning.
3. Start Radcom View again (unless already running) and from the menu select
<Configuration> and then <Advanced Configuration
…>
Magnetic ‘Target’
for Infra- Red
Reader
Infra-Red
Reader
Inputs -
pressure & flow
IR Window
Input
– pressure
Serial / USB
adaptor