1
2
Picture 7
Assembly console (Picture 7)
The Console (1) requires two AA batteries (not included); alkaline batteries are
recommended. Do not use old and new batteries together or alkaline, standard,
and rechargeable batteries together.
IMPORTANT: if the console has been exposed to cold temperatures,
Allow it to warm to room temperatures before you insert batteries.
Otherwise, you may damage the console displays or other electronic
Components.
Press the tab on the battery cover, and remove the battery cover. Next, insert
batteries into the battery compartment. Make sure to
Orient the batteries as shown by the diagram inside the battery
Compartment . Then, reattach the battery cover .
COMPUTER
FUNCTIONAL BUTTONS:
MODE -
Push down for selecting functions.
SET -
To set the values of time
、
distance
、
calories and pulse when not in scan mode.
RESET -
Push down for resetting time
、
distance and calories.
FUNCTION AND OPERATIONS:
1.SCAN:
Press “MODE” button until “SCAN” appears, monitor will rotate through all the 5 functions: Time
、
speed
、
distance
、
calorie
ODO and pulse. Each display will be hold 4 seconds.
2.TIME:
(1) Count the total time from exercise start to end.
(2) Press “MODE” button until “TIME” appears, press “SET” button to set exercise time. When the “set” is zero, the
computer will alarm 15 seconds.
3.SPEED:
Display current speed.
4.DIST:
(1) Count the distance from exercise start to end.
(2) Press “MODE” button until “DIST” appears. Press “SET” button to set exercise distance. When the “set” is zero, the
computer will alarm 15 seconds.
5.CALORIES:
(1) Count the total calories from exercise start to end.
(2) Press “MODE” button unit “CAL” appears. Press “SET” button to set exercise calories. When the “set” is
zero, the computer will alarm 15 seconds.
6. ODO
：
Monitor will display the total accumulated distance.
7. PULSE:
Press MODE button until “PULSE” appears. Before measuring your pulse rate, please place your palms of your
hands on Both of your contact pads and the monitor will show your current heart beat rate in beats per minute(BPM) on the LCD after
6~7 seconds. Remark: During the process of pulse measurement, because of the contact jamming, the measurement value may be
higher than the virtual pulse rate during the first 2~3 seconds, then will return to normal level. The measurement value can not be
regarded as the basis of medical treatment.
