25
21
11
Picture 1
21
24
11
Picture 2
22
Main frame set
1
62
Bearing 6901
1
23
Flat washer OD20*ID8.5*2.0T
1
63
Bearing 6904
1
24
Front stabilizer tube
1
64
Towel rack
1
25
Rear stabilizer tube
1
65
Copper bushing
1
26
Upper sensor wire
1
66
Single bearing
1
27
Lower sensor wire
1
67
Small belt wheel
1
28
Seat post knob
1
68
Bearing 6001
1
29
Seat
1
69
Screw M10*35
1
30
Seat adjust set
1
70
Adjustable foot pad
2
31
Seat post set
1
71
Moving wheel right
1
32
72
Moving wheel left
1
33
Seat adjsut knob
1
73
Flywheel
1
34
Left chain cover
1
74
Single alxe sleeve
1
35
Screw M4*20
17
75
Right chain cover
1
36
Left&right pedal
2
37
Crank decorate cover
2
38
Seat post bushing
1
39
crank leg
1
40
Bowl set
（
10pcs
）
1
ASSEMBLY INSTRUCTION
Identify the Rear Stabilizer (25), which has a leveling dial on each end (Picture 1)
1. Set a piece of packing material under the rear of the Frame. Have a second person
hold the Frame to prevent it from tipping while you complete this step .
2 Attach the Rear Stabilizer (25) to the Frame with two M8*92mm Screws (21) and two
M8 Curved Washers (11).
Remove the packing material.
Identify the Front Stabilizer (24),which has a leveling dial on
each end. (Picture 2)
1. Set a piece of packing material under the front of the Frame. Have
a second person hold the Frame to prevent it from tipping while you
complete this step .
2.Attach the Front Stabilizer (24) to the Frame with two M8*92mm
Screws (21) and two M8 Curved Washers (11).
