Intesis
TM
KNX
– Mitsubishi Electric CC
User Manual r1.1 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
14 / 32
4.2. KNX DPT for Fan Speed comm objects. DPT_5.001, DPT_Scaling
. Control/monitoring of Fan Speed
is performed by means of scaling (percentage) objects. Thresholds for control object and values for status
object will vary according to number of fanspeeds of the unit (number of fanspeeds of each unit is configured
in Mitsubishi Electric configuration tab).
4.2. KNX DPT for Fan Speed comm objects. DPT_5.010, DPT_Value_1_Ucount
. Control/monitoring of
Fan Speed is performed by means of enumerated values.
4.3. KNX DPT for Fan Speed comm objects. DPT_5.010, DPT_Value_1_Ucount
. Control/monitoring of
Fan Speed is performed by means of enumerated values.
4.4. Use of 1-bit Fan Speed.
1-bit Control Objects.
Enables a bit-type object for control of fan speed.
4.5. Use of 1-bit Fan Speed.
1-bit Status Objects.
Enables a bit-type object for monitoring of each fan
speed.
5. Vane Position.
Settings related to KNX interface for control and
feedback of Mitsubishi unit’s vane position.
5.1. Auto & Swing Vanes.
Configures availability of Auto Vanes and Swing vanes control/monitoring objects.
5.2. KNX DPT for Vane Position comm objects. DPT_5.001, DPT_Scaling
. Control/monitoring of Vane
Position is performed by means of scaling (percentage) objects.
5.3. KNX DPT for Vane Position comm objects. DPT_5.010, DPT_Value_1_Ucount
. Control/monitoring
of Fan Speed is performed by means of enumerated values.
5.4. Use of 1-bit Vane Position.
1-bit Control Objects.
Enables a bit-type object for control of vane position.
5.5. Use of 1-bit Vane Position.
1-bit Status Objects.
Enables a bit-type object for monitoring of each vane
position.
