Intesis
TM
KNX
– Mitsubishi Electric CC
User Manual r1.1 EN
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
19 / 32
Figure 4.9
Advanced Parameters for communication with Centralized Controllers
For them, the default values should be correct for most installations. They might need adjusting in particular cases
where there are particular requirements in the communication. Their function is following:
1. Polling Period:
Time in milliseconds between each request sent to the Centralized Controller
2. Answer Timeout:
Time in seconds that Intesis will wait for a response from Centralized Controller after
sending a single request for information through TCP/IP.
3. Controller Connection Timeout:
After Intesis starts TCP/IP socket connection, time that the Intesis will wait
for the Centralized Controller to accept the socket request. For each individual request, Intesis starts a new
socket connection.
