ENSURE TO FIRMLY TIGHTEN ALL NUTS AND BOLTS
YOUR UNIT IS NOW FULLY ASSEMBLED
ENSURE TO FIRMLY TIGHTEN ALL NUTS AND BOLTS
YOUR UNIT IS NOW FULLY ASSEMBLED
WARNING:
- THIS TREADMILL IS HEAVY & WHILE THE FRAME IS BALANCED IT SHOULD BE MOVED WITH GREAT
CARE AS POSSIBLE INJURY MAY RESULT FROM INCORRECT OVEMENT.
TO MOVE THIS TREADMILL WHEN ASSEMBLED, PLEASE ENSURE THAT YOU LIFT (& CONFIRM AS LOCKED) THE
RUNNING DECK INTO AN UPRIGHT POSITION. THE KNOB OR FRAME LOCK MUST BE FULLY ENGAGED.
TILT THE RUNNING DECK TOWARDS YOU TO DISENGAGE THE FLOOR FRAME FROM ITS FLAT POSITION ON THE
FLOOR & TO ENSURE THAT THE FRAME TRANSPORTATION WHEELS (30) RUN SMOOTHLY. CAREFULLY
MANOEUVER THE TREADMILL TO ITS DESIRED POSITION.
COMPUTER
QUICK START
1.
Simply start pedaling and way you go!
2.
The value of time, distance and calories will start counting upwards.
3.
Adjust the resistance level with the large dial control knob.
OPERATIONAL INSTRUCTIONS
USING
THE
METER
DESCRIPTION
POWER ON
●
Pedal movement or push the MODE button.
POWER OFF
●
Automatic shut off after four minutes of inactivity.
MODE BUTTON
●
Press to select display functions, include SCAN, TIME, SPEED, DISTANCE,
CALORIES and HEART RATE.
●
Press and hold for three seconds to reset all functions to zero.
FUNCTIONS
DESCRIPTION
SCAN
●
Automatically scans each function to time, speed, distance, calories, and heart
rate in sequence with change every four seconds. Press and release the MODE
button until SCAN appears on the display.
TIME
●
Display the time for one second up to 99:59 minutes.
SPEED
●
Display the current speed from zero to 999.9 KM per hour.
DISTANCE
●
Display the distance from zero to 99.99 KM.
CALORIES
●
Display the calories consumption from zero to 999.9 kcal.
●
The calories readout is an estimate for an average user. It should be used only as
a comparison between workouts on this unit.
HEART RATE
●
Display your heart rate in beats per minute. To display heart rate, select the heart
rate mode and grasp the pulse sensors on the handlebars, one in each hand.
The heart symbol will begin flashing when the meter senses your heart rate. Your
heart rate will be displayed approximately five seconds after the heart icon is
displayed. If you do not place your hands correctly and 60 seconds passes
without a heart rate reading, the meter will turn off the heart rate circuit. If this
occurs, press the MODE button to restart, place your hands back on the pulse
sensors correctly, and the heart rate readout will appear.
Summary of Contents for B4228
Page 1: ...INSTRUKCJA U YTKOWANIA MANUAL INSTRUCTION N VOD K OBSLUZE...
Page 32: ......
