HMS B4228, Manual Instruction

Page: 15 / 32

30 TRANSPORTATION WHEEL 2
31 ALLEN HEAD BOLT M12x70mm 2
32 CAP D36 2
33 MACHINE SCREW M4x15mm 4
34 RUNNING BELT 1
35 FRONT ROLLER W/MAG. FLYWHEEL 1
36 RUNNING DECK 1
37 SIDE RAIL 920x35.5x2.0T 2
38 DOUBLE-SIDE STICKER 850x25x1.5t 2
39 REAR ROLLER Φ42Xφ15x470 1
40R/L JOINT TUBE
PAIR
41 SCREW M8x18mm 6
42 SCREW M5x60mm 1
43 FLAT WASHER Φ6 2
44 ALLEN HEAD BOLT M8x40mm 4
45 SCREW M5x25mm 1
46 BUTTON HEAD SCREW M8x30mm 2
47 ALLEN HEAD BOLT M6x60mm) 2
48 FRAME END CAP 2
49 MACHINE SCREW M5x12mm 4
50 LEFT UPPRIGHT 1
51 RIGHT UPRIGHT 1
52 CURVE WASHER M8 4
53 ALLEN WRENCH 1
54 ALLEN WRENCH 1
55 ALLEN HEAD BOLT M10x65mm 1
56 HAND PALSE WIRE 1
57 SPRING WASHER M8 4
58 HAND PULSE SENSOR PLATE 2P
60 Bottle Holder 1
61 Screw M5X15mm 2
ASSEMBLY INSTRUCTION
Set all parts in a clear area on the floor and remove the packing material. Refer to the parts list for help to identify the parts.
It will take two people to assemble your unit.
STEP 1 ASSEMBLE THE UPRIGHTS
1.
Remove four M8x40mm Allen Bolts (44) , four M8 spring washers (57) and four M8 curve washers (52) from front base frame
(2).
2.
Attach right upright (51) to the front base Frame (2) , securing with two M8x40mm Allen bolts (44) , two M8 Spring Washers (57)
and two M8 curve washers (52) .
3.
Do the same procedure for left upright (50) with front base frame (2) assembly.