HMS ATLAS TYTAN 22, Manual Instruction

Page: 25 / 50

Assembly
Step 4
Step 4
1. Install the 50*50 Plug(#39) and the Sleeve(#58) to the Leg Extension Arm(#9).
2. Attach the Seat Frame(#8) and the Flat Plate(#11) to the Main Upright(#1) with (2)M10*75 Hex
Bolts(#45),(4)
φ
10 Washers(#48) and (2)M10 Nylon Lock Nuts(#49).
3. Attach the Leg Extension Arm(#9) to the Seat Frame(#8) with (1)M10*75 Hex Bolt(#45), (2)
φ
10
Washers(#48) and (1)M10 Nylon Lock Nut(#49).
4. Insert the Pin with ring(#17) to the Seat Frame(#8).
5. Insert the
φ
25 Plug(#37) to the Foam Roller Tube(#30).
6. Slide the Foam Roller Tube(#30) through the round hole. Slide the Foam Roller(#31) onto the Foam
Roller Tube(#30).
7.
Adjust the Bolt(#45) just enough for part(#9) to pivot freely,then install the M10 Nut Caps(#57).
One hole for locking the
Leg Extension Arm Another hole for releasing
the Leg Extension Arm