HMS ATLAS TYTAN 22, Manual Instruction

Page: 22 / 50

Assembly
Step 1
1. Separately install the Foot End Cap(#64) to the end of the Rear Base(#3).
2. Insert the Guide Rods(#10) to the holes of the Rear Base(#3). Secure the Guide Rods(#10) with
(2)M10*20 Countersunk Bolts(#46).
3. Attach the Rear Base(#3) to the Main Bottom Frame(#2) with (2)M10*75 Hex Bolts(#45), (4)
φ
10
Washers(#48) and (2)M10 Nylon Lock Nuts(#49).
4. Install the 50*50 Plug(#39) to the Main Upright(#1).
5. Attach the Main Upright(#1) to the Main Bottom Frame(#2) with (2)
φ
10 Washers(#48) and (2)M10
Nylon Lock Nuts(#49).
Note: Wrench tighten the Countersunk Bolt M10*20(#46) and (2)Hex Bolts M10*75(#45) for
locking the part (3, 10). Hand tighten other bolts.