6.7. I/O Configuration
Figure 23. I/O configuration page
Enter the desired Size for the network input data and output data.
By default, the Communicator is set to use the same I/O sizes for both the Modbus TCP and the PROFIBUS
networks.
To configure different sizes for the networks, deselect the Same I/O sizes for both networks checkbox.
Endian Swap
Big-endian
The big-endian format places the most significant byte of the data at the byte with the lowest memory address.
Little-endian
The little-endian format places the least significant byte of the data at the byte with the lowest memory address.
Anybus
®
Communicator
™
- Modbus TCP Server to PROFIBUS DP Device
I/O Configuration
Page 32 of 60
SCM-1202-201 Version 1.0