5.2. DIN Rail Mounting
IMPORTANT
The equipment must be electrically grounded through the DIN rail for EMC compliance. Make sure
that the equipment is correctly mounted on the rail and that the rail is properly grounded.
Figure 4. Attach the Communicator on the DIN rail
To attach the Communicator on the DIN rail:
1. Insert the upper end of the DIN rail clip into the DIN rail.
2. Push the bottom of the DIN rail clip into the DIN rail.
DIN Rail Mounting
Anybus
®
Communicator
™
- Modbus TCP Server to PROFIBUS DP Device
SCM-1202-201 Version 1.0
Page 9 of 60
