HMS Networks Anybus Communicator ABC4018 User Manual Download Page 54

Page: 54 / 64

9.3.4. Update Firmware

Before You Begin
Ensure that the Communicator is disconnected from the OT networks.

Procedure

Figure 42. Files & firmware page

To update the firmware:

On the Files & firmware page, click Upload.

In the Upload Firmware window, click Select firmware (.hiff).

In the Open dialog box, browse to and select the firmware file and click Open.

To start the firmware upgrade, click Update firmware.
The firmware file is validated and transferred.

Result
• If the firmware file pass the validation: The firmware is upgraded and then the Communicator automatically

reboots, for the upgrade to take effect.

• If the firmware file is rejected: An error message appear.

Anybus

Communicator

™

- Modbus TCP Server to PROFIBUS DP Device

Firmware Management

Page 50 of 60

SCM-1202-201 Version 1.0

Summary of Contents for Anybus Communicator ABC4018

































































Search results

Summary of Contents for Anybus Communicator ABC4018

Reviews:

Related manuals for Anybus Communicator ABC4018

Brands by name

Popular brands

HMS Networks Anybus Communicator ABC4018, User Manual

Search results

Summary of Contents for Anybus Communicator ABC4018

Reviews:

Related manuals for Anybus Communicator ABC4018

Brands by name

Popular brands