3
Base Station External Features
Front —
(See
A
on Figure 2.)
•
Four
power supply lights
are on when the base station has AC power.
•
“A” TALK light
is on during channel-A transmission.
•
“B” TALK light
is on during channel-B transmission.
•
VEHICLE PRESENT light
is on when a vehicle is present in the drive-thru lane or
when the system is in vehicle-detect override.
•
RECORD light
is ON RED when the base station is ready to record red message for
the message repeater, and BLINKING RED while a red message is being recorded.
It is ON GREEN when the base station is ready to record green message for the
message repeater, and BLINKING GREEN while a green message is being recorded.
Bottom —
(See
B
on Figure 2.)
•
PUSH FOR RECORD MODE button
must be pushed IN AND RELEASED ONCE to
prepare the base station to record red message for the message repeater, or pushed
IN AND RELEASED TWICE to record green message.
Behind Front Door —
(See
C
on Figure 2.)
•
GREEN MESSAGE and RED MESSAGE switches
must be switched ON to use the
message repeater, OFF when the message repeater is not being used. Instructions
are given inside the front door.
•
SPEED TEAM switch
must be switched ON for speed-team operation, OFF for normal
drive-thru operation
•
VEHICLE DETECTOR switch
must be switched to OVERRIDE to disable the vehicle
detector. To reset the vehicle detector, switch to OVERRIDE for 5 seconds, then switch
back to NORMAL and leave for normal vehicle detection operation. If the switch is left
in the OVERRIDE position, the outside microphone will remain on continuously.
•
DIP switches
at the top are used to control message routing to the outside speaker, grill
speaker or COMMUNICATOR
®
s. DIP switch settings are shown inside the front door.
•
Nine level controls
are used to set the following levels:
VAA LEVEL CONTROL
adjusts the volume level at which the order taker, speaking
into the headset microphone, will cause the inbound volume of the customer’s voice
to be lowered in the Communicator headset.
VEH. PRES TONE VOL.
adjusts the vehicle-present tone volume in the headset.
VEH. PRES. TONE VOL. GRILL
adjusts the volume of the vehicle present tone
played through the grill speaker.
SPKR VOL. OUTSIDE
adjusts the outside speaker volume.
MSG VOL. OUTSIDE
adjusts the volume of the outgoing message-repeater
message to the customer at the speaker post or menu board.
INBOUND VOL GRILL
adjusts the volume of the inbound audio from the outside
microphone played through the grill speaker.
A VOL. GRILL
adjusts the volume of channel A communication, from Communicator
operators, played through the grill speaker.
B VOL. GRILL
adjusts the volume of channel B communication, from Communicator
operators, played through the grill speaker.
MSG VOL. GRILL
adjusts the volume of the message-repeater message played
through the grill speaker.
