HM Electronics ION IQ NDT, Operating Instructions Manual

Page: 8 / 32

7

To register headsets/belt-pacs, press the Register headsets
button on the HEADSET REGISTRATION display.

On the TO REGISTER HEADSETS display, follow the
instructions in the box.

If you are registering only one headset/belt-pac, press the Register
single button on the TO REGISTER HEADSETS display.

If you are registering more than one headset/belt-pac, press the
Register multi button on the TO REGISTER HEADSETS display,
and continue registering the remaining ones, one at a time.
When each registration is successfully completed:

The ID number assigned to this headset/belt-pac will be shown.
ID numbers are assigned sequentially as 0 thru 9, A, B, C, D and E.

When you have finished registering headsets/belt-pacs, press the
Back button to exit the registration mode. You can continue
pressing the Back button repeatedly until you return to the MAIN
MENU or MESSAGE STATUS display.

The power light on the headset/belt-pac will remain on steady
green.
If you have any problems registering headsets/belt-pacs:
In the USA, call HME Customer Support at 1-800-848-4468.
Outside the USA, call your local HME representative for assistance.