HM Electronics ION IQ NDT, Operating Instructions Manual

Page: 26 / 32

39
PC Navigation
If your ion|IQ
®
NDT was set up to operate with a PC network, all of
the same settings that can be edited on the base station can also be
edited on your PC. The following examples show you how to navigate
through system settings as they appear on your PC screen.
The ion|IQ
®
NDT provides the ability to view and edit base station
configuration settings.
To open the ion|IQ
®
NDT on your PC, enter its IP Address in the
address bar on your internet browser as shown below, and then
press the
Enter key on your keyboard.
Select any category from the
Main Menu that you would like to
view or edit. Some topics will cause a Secondary Menu bar to
appear, from which you can select a sub-topic.
If you click your cursor on an Edit button, an edit bar will appear
with setup choices. If you make any setup changes, you must
click on the
Save button to save your changes. If you do not
want to save your changes, or do not make any changes, you can
click on any other menu topic, or click on the back arrow at the
top-left corner of the browser screen.
NOTE:
To find the IP Address, go
through the following
display path on your base
station:
MESSAGE STATUS >
More > More > More .
Edit
buttons
Secondary menu Main menu
Save
button
Edit
bar