HLF 4600 G1, Instruction Manual, Page: 39 / 73

CLEANING GUIDE
I.M. HLF 4600 G1/2/F Eng V2-2010 39 HLF Italian Design
4.5 How to remove and clean the coffee group (Once a month or after 1000 coffee
cycles)
The coffee group is located
on the front side of the HLF 4600 G coffee maker. It creates
the espresso coffee by compressing the ground coffee beans into a “ puck ” and forcing
the water to go through this “ puck ” that creates a perfect espresso.
It’s recommended to do this process once a month or when the message
“Clean Cof.
Group” is flashing on the LCD display, which means that 1000 coffee cycles has been
done, and a coffee group cleaning process is needed.
CAUTION
Turn OFF the HLF 4600 G coffee maker.
To remove the coffee group, simply turn each of the four levers to the 12:00 position,
take off the hose on the front of the coffee group, and pull it straight out.
Wash it only in hot water, without detergent. Dry thoroughly.
To replace it, reverse the process.