manualshive.com logo in svg

HLF 4600 G1, Instruction Manual, Page: 15 / 73

Share
Download
HLF 4600 G1 Instruction Manual Download Page 15

SAFETY

 

INSTRUCTIONS 

 

 

I.M. HLF  4600 G1/2/F Eng V2-2010 

15 

HLF  Italian Design 

 
• Never unscrew the computer board placed behind the front door. This operation has to 
be done by authorized personnel only. 
 
• Never unscrew the back panel of the machine. This operation has to be done by 
authorized personnel only. 
 

 

WARNING

  

 
• Hot air comes out from the bottom of the steam outlet. There is a danger of scalding. 
 
• The bottom of the steam pipe is hot after it has been giving off steam. There is a 
danger of burns.  
 
• Hot liquid comes out from the bottom of the beverage outlet. There is a danger of 
scalding.  
 
• Hot liquid comes out from the bottom of the hot water outlet. There is a danger of 
scalding.  
 
• The bottom of the hot water outlet is hot after it has been dispensing liquid. There is a 
danger of burns.  
 

 

WARNING

  

 
• Never interfere with the electricity supply connection or modify it. This could result in 
fatal injuries.  
 
• Never remove the screw mounted covers. This operation can be dangerous because 
can result in fatal injuries upon contact with live components.  
 

 

NOTE

  

• Electrical equipment which does not have adequate electro-magnetic protection should 
not be operated close to the HLF  4600 G coffee maker. 
 
• The drip tray serves solely to collect drip water. It must not be used as a sink.  
 

 

Summary of Contents for 4600 G1










































































Reviews:

No comments