OPERATING THE COMPUTER SOFTWARE
I.M. A.4000 Eng V3-2007
37
HLF Italian Design
This is the amount of water in seconds used to melt the instant soluble powder from the
canister number 1. By pushing buttons 1 or 2 it’s possible to increase or decrease the
value.
NOTE
To get hot water from the hot water line (see picture above) it’s necessary to put 0
(
zero
) on all the other setting of the soluble 1 and put a number on the water 1
according with the amount of hot water desired.
By pushing again button 3, the message
P R O G R A M Delay W 1 = X
will appear on
the LCD display.
P R O G R A M
Delay W 1= X
This is the delay time that is possible to set before to have the water 1 falling into the
mixing bowl. By pushing buttons 1 or 2 it’s possible to increase or decrease the seconds
of delay.
NOTE
This delay has to be used only in case of special recommendation from the supplier of
the instant soluble powders. Normally keep it at zero.
By pushing again button 3, the message
P R O G R A M Whipper 1 = X
will appear on
the LCD display.
P R O G R A M
Whipper 1 = X
Summary of Contents for AROMA 4000
Page 60: ......
