HKS VFD Drive A2 Series, User Manual

Page: 20 / 44

A2 VFD
(0.75-30kW)
17
Chapter 8 Operation Examples
8.1 Operation by panel
Pn 04 = 1(Command from panel)
，
Pn 03 = 1(Frequency from potentiometer)
。
Push button “RUN” on the panel, VFD starts up and running indicator is on.
Push the button again, VFD would stop.
8.2 Operation by external signal
Pn 04=2 (command from port “FWD/REV”)
Pn 03=3 (frequency from port “5V”)
8.3 Multi-segment speed
Pn 04=2(command from port “FWD/REV”)
Pn 03=7(frequency from multi-segment 0-7)
8.4 Point move by panel
Command
（
Pn 04
）
must come from panel
（
=1
）
. Frequency
（
Pn 03
）
must be
specified by button
（
=2
）
.After VFD stops, push button “
←
” to clockwise point
move and “
→
” to anticlockwise point move.
8.5 Point move by external signal
Command
（
Pn 04
）
must come from port “FWD/REV”
（
=2
）
. Frequency
（
Pn 03
）
must come from external digital port
（
=6
）
. After VFD stops,
connect “D0” and “JOG” to “GND” to point move clockwise, connect “D1” and
“JOG” to “GND” to point move anticlockwise.