A2 VFD
(0.75-30kW)
8
Chapter 3 Control Panel
Button
Description
RUN
STOP
Start in operation mode running, and if press again it
stops VFD running.
STOP
RESE
T
There are different meanings to push this button during
different modes:
1.if the VFD is running, it would stop;
2. If a fault happens, the VFD would be reset;
3. If it is operated on menus, it returns to parent menu.
REV
Change the VFD’s direction. It also works during the
runtime.
SET
Press this key to enter the menu setting, if in the menu
sub item, press this key to save this menu parameter and
go to the next level menu item.
▲▼
Menu item selection and sub item data modification.
◄►
Menu item content modification selection or VFD
jogging button.
Adjustment Knob
To control the frequency.
Summary of Contents for VFD Drive A2 Series
