80310-AN004
-
10
-
4. Installing the Rear Suspensions
1. Install the provided rear suspension assy to the vehicle using the
upper rear suspension assy installation nuts
③
.
(Torque Specs: 16
-
19N·m)
(Diagram 4
-
1)
* Refer to the labels attached to the suspension assy to install the
suspension assy to the correct side.
2. Install the provided M12 bolt, washer, spacer (thin · for rear),
spacer (thick · for rear) and M12 flange nut.
(Torque Specs: 88
-
108N·m)
(Diagram 4
-
2, 4
-
3)
3. Mount the wheels back on, then lower the vehicle.
4. Make an incision for the adjustment dial in the trunk side finisher
①.
Install the trunk side finisher
①
to the vehicle.
(Diagram 4
-
4)
CAUTION
After re
-
mounting the tires, make sure the product does
not come into contact with the wheels/tires. Re
-
alignment
is required after installation of this product.
4
-
3
M12 Flange Nut
M12 Bolt
Spacer
(Thin · for Rear)
Spacer
(Thin · for Rear)
Washer
Spacer
(Thick · for Rear)
NOTICE
Refer to the service manual for torque specs when tightening bolts and nuts. Make sure to tighten the bolts
and/or nuts to the specified torque to avoid the damage to the bolts, nuts and/or shock absorber internals.
4
-
2
M12 Bolt, Washer, Spacer (Thin),
Spacer (Thick) and M12 Flange Nut
4
-
4
①
Incision for Adjustment Dial
4
-
1
③