80310-AN004
-
9
-
3. Removing the Factory Rear Suspensions
WARNING
When installing this product, do not use scissor
-
jacks supplied with the vehicle. Use of unstable scissor
-
jacks
can lead to severe bodily injury or death. Always use vehicle lifts/hoists or garage jacks with jack
-
stands.
1. Remove the trunk side finisher
①
.
(Diagram 3
-
1)
4. Remove the nuts from the upper rear suspension assy
③
.
(Diagram 3
-
3)
5. Remove the factory rear suspension assy from the vehicle.
2. Jack up the vehicle, and remove wheels.
3. Remove the bolt and nut from the lower rear suspension assy
②
.
(Diagram 3
-
2)
* The removed bolt and nut
②
are not reused to install this product.
3
-
2
②
3
-
1: Right Side
①
3
-
3
③
NOTICE
When removing the factory rear suspension assy, make sure not to pull on the brake line and ABS sensor.
When these are pulled, it may damage the brakes.