80310-AN004
-
8
-
2. Installing the Front Suspensions
1. Install the provided front suspension assy to the vehicle using the
upper front suspension assy installation nuts
②
.
(Torque Specs: 39
-
54N·m)
(Diagram 2
-
1)
* Refer to the labels attached to the suspension assy to install the
suspension assy to the correct side.
2. Install the provided spacer (for front) to the vehicle’s shaft of the
lower suspension’s installation position.
(Diagram 2
-
2)
3. Insert the factory washer between the front suspension assy and the
lower front suspension assy installation nut
①
. Tighten the nut.
(Torque Specs: 108
-
127N·m)
(Diagram 2
-
2, 2
-
3)
4. Mount the wheels back on, then lower the vehicle.
CAUTION
After re
-
mounting the tires, make sure the product does not come into contact with the wheels/tires.
Re
-
alignment is required after installation of this product.
NOTICE
Refer to the service manual for torque specs when tightening bolts and nuts. Make sure to tighten the bolts
and/or nuts to the specified torque to avoid the damage to the bolts, nuts and/or shock absorber internals.
2
-
3
①
2
-
2
①
Factory
Washer
Spacer (for Front)
Rubber Bush’s Flat Side
Vehicle’s
Side
Front
Suspension
Assy
2
-
1
②