1. General information
Smart Fire boiler is and advanced heating system burning pellets.
The system includes: thermo-control system, a system facilitating manual cleaning of the heat
exchange, advanced ceramic burner, automatic system of burner clearing, and an automatic lighter.
The boiler can provide heat to the central heating system in a building, with pump or gravitational
circulation, as well as hot tap water.
Smart Fire has been rated as low-temperature system and therefore needs no registration with the
local authorities in most jurisdictions.
Solid fuel boilers operating in a closed circuit are sometimes subject to a limited technical
supervision. Once the boiler is installed, the user may need to notify the local supervising
authorities before launching operation.
2. Recommendations
Initial launch and the all relating tasks and any service work can only be completed by the
manufacturer's or authorised service team.
Only fuel specified herein can be burned.
The boiler must be regularly maintained as specified in this Operation Manual.
Always observe the requirements set in this manual
Failure in submission to the provisions of the manual will result in loss of warranty and exempt the
manufacturer of responsibility of the outcome of the system's operation.
You shall observe the general rules applicable to heating technology to protect the system of
legionellosis.
3. Safety rules
Read these rules before launching operation. Failure in submission to the instruction may lead
to: casualty, loss of health, life hazard, damage to the system, the heating installation and the
Instrukcja Smart Fire
wer. 07/05/2010/ENG
HKS LAZAR
str.4
