Hkoenig homy90, Instruction Manual

Page: 18 / 117

Trouble shooting
problems reasons solutions
the machine doesn’t
work after power on
and press start button
1.power cord not installed
properly
1. install power cord properly
2.self protection for motor long
time working 2. reuse after cooling for 20—
30 minutes
3. stir cup, stir cup lid not properly
installed 3. stir cup, stir cup lid properly
installed
lights on, the
machine doesn’t work
1.not pressing buttons
1. select function and press
button
2.machine self breakdowns 2.repair at local service site
machine stops during
working process
1.material ratio not right, overload
making stuck and stops working
follow strictly as “volume ratio ”
to add material, add water if
too dry, stir to pasta,
select[extrude pasta]; if too wet
add flour to stir, select[extrude
pasta].
2.other objects in the flour,
overload making stuck and
machine stops
2. power off to clean
3.motor temperature control
protection 3.reuse after 20-30 minutes
stop
no response when
pressing buttons
1. power off interval too short,
system not reset 1. reuse after power off 3
minutes
2.the machine is under procedure 2.normal case
3. machine self breakdowns 2. repair at local service site
pasta easily break
1. not using plain, strong protein
flour 1. choosing plain or strong
protein flour
2. water and flour ratio not
proper, less water 2.add flour and water as cup
mark
pasta adhere
water and flour ratio not proper,
more water
add water, flour as cup mark
flour leftovers too
much in the stir cup
1.low voltage
1.using household voltage
stabilizer
2.module hole blocked 2.clean module holes
3.material matching mistake
3. follow strictly “ratio chart” to
add material
Sound and light
alarm
the machine blocked 1.check and clean cups