18
The Data View menu displays information pertaining to the
charging and discharging processes of a Lithium chemistry
battery. When a balancing cable is attached, the screen will
also display the voltage of the individual cells as well as the
highest and lowest cell value.
The voltage curve screen shows the voltage curve during
the charge or discharge process. Also shown is the actual
voltage as well as elapsed time.
USER SETUP MENU
When powered on for the first time, the Power Peak D7 charger will load with default values in the programmable
user settings. The screen displays the following information in sequence and the user can change the value
of the parameters on each screen. Use the + and - buttons to scroll through the option, when you are ready
to change the parameter values in the program, press START/ENT to highlight the value, and then select the
appropriate values with + and - buttons. Store the value by pressing
START/ENT once.
The screen shots and table below show the user settings that can be changed as well as the available options.
[ DATA VIEW ]
Main : 11.39 V
Max : 3.81V
Min : 3.79V
3.79 V
3.79 V
3.81 V
0.00 V
0.00 V
0.00 V
0.00 V
V
(VOLTAGE CURVE)
11.46V
00:01:38
00:01:38
[ User Setup ]
Language :
English
Rest Time :
10 Min
Safety Cut :
ON
Safety Time :
120 Min
Capa Cut :
ON
Capa Value :
500mAh
Key Beep :
ON
[ User Setup ]
Buzzer :
English
Input Low :
10 Min
Int. Temp :
ON
Reset :
120 Min
Version :
ON
