1-9
StarBoard FX-77/FX-63/FX-82W
Introduction
English
(2) Board Installation
Connect each mounting bracket to the top square hole in the board receiving bracket
located at the back of the board on both sides.
This work should be performed by at least two people.
The board might fall and cause injury or its impact might cause damage.
CAUTION
NOTE
・
The equipment might malfunction if set up in an excessively bright location. If the
ceiling lights are too bright, it will be necessary to adjust the brightness by turning
off the lights, etc.
・
Either avoid setting it up in a location exposed to direct sunlight or near a window, or
use curtains, etc., to block the sunlight. Otherwise, the equipment might
malfunction.
・
If multiple systems are set up in the same room or adjacent to each other, they might
malfunction. If necessary, contact the technical support in advance.
