![Hitachi ZAXIS 120-3 class Operator'S Manual Download Page 17](http://html.mh-extra.com/html/hitachi/zaxis-120-3-class/zaxis-120-3-class_operators-manual_141610017.webp)
SAFETY
S-6
FASTEN YOUR SEAT BELT
•
If the machine should overturn, the operator may become
injured and/or thrown from the cab. Additionally the opera-
tor may be crushed by the overturning machine, resulting in
serious injury or death.
• Prior to operating the machine, thoroughly examine web-
bing, buckle and attaching hardware. If any item is dam-
aged or worn, replace the seat belt or component before
operating the machine.
• Be sure to remain seated with the seat belt securely
fastened at all times when the machine is in operation to
minimize the chance of injury from an accident.
• We recommend that the seat belt be replaced every three
years regardless of its apparent condition.
010-E01A-0237
MOVE AND OPERATE MACHINE SAFELY
•
Bystanders can be run over.
• Take extra care not to run over bystanders. Confirm the
location of bystanders before moving, swinging, or oper-
ating the machine.
• Always keep the travel alarm and horn in working condi-
tion (if equipped). It warns people when the machine
starts to move.
• Use a signal person when moving, swinging, or operating
the machine in congested areas. Coordinate hand signals
before starting the machine.
• Use appropriate illumination. Check that all lights are op-
erable before operating the machine. If any faulty illumi-
nation is present, immediately repair it.
011-E01A-0398
HANDLE STARTING AIDS SAFELY
Starting fluid:
•
Starting fluid is highly flammable.
• Keep all sparks and flame away when using it.
• Keep starting fluid well away from batteries and cables.
• Remove container from machine if engine does not need
starting fluid.
• To prevent accidental discharge when storing a pressur-
ized container, keep the cap on the container, and store it
in a cool, well-protected location.
• Do not incinerate or puncture a starting fluid container.
036-E01A-0293-3
SA-237
SA-426
SA-293
Summary of Contents for ZAXIS 120-3 class
