- 1-9 -
Chapter 3
Administrator
Settings
Chapter 1
Administrator
Settings
Network
■
Wireless LAN
The SSID that identifies the access point can be set.
1
From the Config1(profile name) menu,
Select “2. WLAN” using the keys of the
key,
and set using the
key.
2
Select “Edit” using the
key.
Input the SSID value of the wireless LAN to be connected to.
If left blank, connection is made to the access point having the strongest wave signal
from among the access points that can be connected to.
Finally, save using the
key.
■
Encryption
These settings are related to encryption. This product supports encryption based on WEP (64/128/256 bits).
1
From the Config1(profile name) menu,
Select “3. Security” using the keys of the
key,
and confirm using the
key.
2
Select “Edit” using the
key.
For “Mode”, select "Disabled", "WEP", or "WPA-PSK" using the keys of the
key.
Mode
Explanation
WEP
Based on the WEP key that was set, an effectively secure method for
encrypting wireless communications data is made.
WPA-PSK
This is the method to encrypt wireless communications data based on a
pre-shared key set in both this product and the connected device. As the
encryption key is replaced automatically, strong security can be
achieved.
Summary of Contents for WirelessIP 3000
Page 4: ... 1 1 Chapter 1 Administrator Settings ...
Page 41: ... 2 1 Chapter 2 Web Settings ...
Page 49: ... 3 1 Chapter 3 Appendix ...
