- 1-25 -
Chapter 1
Administrator
Settings
Network
Network Search
Information on detected signals can be displayed.
1
From the Network menu,
Select “5. Site scan” using the keys of the
key,
and confirm using the
key.
2
A message indicating a search is in progress appears.
Several seconds later, the SSIDs of the detected access points are displayed.
When detailed information needs to be viewed,
select the SSID using the keys of the
key,
and confirm using the
key.
Access points that are set to ‘reject ANY’ connection are not displayed
in the detection result listing. If the detected access point is encrypted,
the SSID is displayed with a net overlay. In addition, access points can
be displayed for up to a maximum of 10 locations.
3
To refresh the network search information, press the
key to select the
submenu and then select “1. Refresh”.
The network search is started again.
Notice
Summary of Contents for WirelessIP 3000
Page 4: ... 1 1 Chapter 1 Administrator Settings ...
Page 41: ... 2 1 Chapter 2 Web Settings ...
Page 49: ... 3 1 Chapter 3 Appendix ...
