- 1-6 -
Chapter 1
Administrator
Settings
Network
6
Configure the settings for the network authentication method.
For “Mode”, select “Disable”, “WEB”, “8021X-MD5”, “8021X-TLS”, “8021X-PEAP”, or
“8021X-TTLS” using the keys.
If returning to the previous screen, press the
key.
If anything other than “Disabled” is selected, the screen for setting the user ID and
password is displayed. Input the values as prompted on screen.
Finally, press the
key.
7
Configure the settings for NAT Traversal.
For “Mode”, select “Disable”, “SNAT”, “UPnP”, or “STUN” using the keys.
If returning to the previous screen, press the
key.
If “SNAT” or “STUN” is selected, the respective setting screens are displayed. Input
the values as prompted on screen.
Finally, press the
key.
Summary of Contents for WirelessIP 3000
Page 4: ... 1 1 Chapter 1 Administrator Settings ...
Page 41: ... 2 1 Chapter 2 Web Settings ...
Page 49: ... 3 1 Chapter 3 Appendix ...
