3. To configure the storage system to send notifications as SNMP traps, complete the settings in the SNMP tab.
4. Click Apply, and then click OK.
Step 10: Make host connections
Host attachment tasks include configuring ports and preparing the host hardware and software for connection to the
storage system. For information and instructions, see the host attachment preparation procedures in the
Open-Systems
Host Attachment Guide
. You will also find the following resources helpful:
• For the latest interoperability and compatibility information about supported hosts and host attachment hardware,
see the Hitachi Vantara
• For information about preparing your hosts for use with the storage system, see the documentation for the product.
Connecting Fibre Channel ports to hosts
Important Before connecting the storage system to a host, review the requirements and detailed instructions in the
Open-Systems Host Attachment Guide
.
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Connect the Fibre Channel data ports on each storage system controller to your Fibre Channel switch.
2. Connect your Fibre Channel switch to the Fibre Channel HBA card in each host computer or server.
Connecting iSCSI ports to hosts
Each controller supports 10-gigabit Ethernet copper (RJ-45) or optical (fiber) iSCSI connectivity to your data network.
Important Before connecting the storage system to a host, review the requirements and detailed instructions in the
Open-Systems Host Attachment Guide
.
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Using the appropriate cable, connect the iSCSI data ports on each storage system controller to your Gigabit
Ethernet network switch.
Updated: Wed, 12 Jan 2022 17:18:35 GMT
Powered by
20