31
Input Register data configuration (4/9)
Word
address
Classification
Item name
Setting range
Contents
0B 0A
Communicati
on
environment
setup
Baud rate(Private port)
0 to 10
Gets the baud rate of the private
port.
0B 0B
Data length(Private port)
0 , 1
Gets the data length of the
private port.
0B 0C
Parity bit(Private port)
0 to 2
Gets the parity bit of the private
port.
0B 0D
Stop bits(Private port)
0 , 1
Gets the stop bits of the private
port.
0B 0E
Number of comm. bytes
0 , 1
Gets the number of comm. bytes.
0:1 byte , 1:2 bytes
0B 0F
BCC code handling
0 , 1
Gets the BCC code handling.
0:Disable , 1:Enable
0B 10
Communication mode
0 , 1
Gets the communication mode.
0:overwrite-protected
1:overwrite-enabled
0B
11
Print message transfer ACK
0 , 1
Gets the print message transfer
ACK.
0:t=fixed , 1:t=async.
0B 12
Print spec transfer char height
0 , 1
Gets the print spec transfer char
height.
0:2 digits , 1:3 digits
0B 13
Buffer function
(Function item for
Communication buffer)
0 , 1
Gets the buffer function.
0:Disable , 1:Enable
0B 14
Buffer repeat count
(Function item for
Communication buffer)
1 to 9999
Gets the buffer repeat count.
0B 15
Empty Buffer Fault
(Function item for
Communication buffer)
0 , 1
Gets the empty buffer fault.
0:Disable , 1:Enable
0B 16
Timing of Fault
(Function item for
Communication buffer)
0 , 1
Gets the timing of fault.
0:Print Start, 1:Print. Complete
0B 17
Data Number at Fault
(Function item for
Communication buffer)
0 to 9
Gets the data number at fault.
0B 18
Start output
(Function item for SOP-04)
0 , 1
Gets the start output.
0:Disable , 1:Enable
0B 19
Output kind
(Function item for SOP-04)
0 to 2
Gets the output kind.
0:Disable , 1:Print data , 2:Code
0B 1A
Condition
(Function item for SOP-04)
0 , 1
Gets the condition.
0:Every time
1:Different from last time
0B 1B
Status output
(Function item for SOP-04)
0 , 1
Gets the status output.
0:Disable , 1:Enable
0B 1C
Output item(Start item)
(Function item for SOP-04)
1 to 50
Gets the output item. (nozzle 1)
0B 1D
Output item(End item)
(Function item for SOP-04)
1 to 50
0B 1E
Output comm. ENQ
(Function item for SOP-04)
0 , 1
Gets the output comm. ENQ.
0:Disable , 1:Enable
0B 1F
Output port
(Function item for SOP-04)
0 , 1
Gets the output port.
0:Standard port
1:Secondary port
0B 20
Select message
(Function item for SOP-05)
0 , 1
Gets the select message.
0:Disable , 1:Enable
0B 21
Data exchange
(Function item for SOP-05)
0 , 1
Gets the data exchange.
0:Reflect at once
1:Reflect by signal
0B 22 Reserve_1
-
"Reserve" is not initially provided,
but may be added in future.
…
…
0B 24 Reserve_3
