Hitachi UST-9120 Instruction Manual Download Page 14

Page: 14 / 60

-8-

MN1-5531 Rev. 10

Label 3

Label 2

STERRAD sterilization compatibility mark

See section 5.

IPX7 mark

See section 2-2, “Specifications”.

Type BF applied part

Do not waste the instrument as general waste. Comply

with a local regulation.

See section 10.

Safety warning sign

Biohazard

See section 5.

Follow the instruction manual to operate this instrument.

If not avoided, may result in injury, property damage, or

the equipment trouble.

IPX7

This instrument complies with Directive 93/42/EEC

relating to Medical Device and Directive 2011/65/EU

relating to RoHS.

㻞㻙㻝㻢㻙㻝㻘㻌㻴㼕㼓㼍㼟㼔㼕㻙㼁㼑㼚㼛㻘㻌㼀㼍㼕㼠㼛㻙㼗㼡㻘㻌㼀㼛㼗㼥㼛㻘㻌
㻝㻝㻜㻙㻜㻜㻝㻡㻘㻌㻶㼍㼜㼍㼚㻌㻌㻌㼀㻱㻸㻌㻗㻤㻝㻙㻟㻙㻢㻞㻤㻠㻙㻟㻢㻢㻤

Model

Serial No.

Manufacturer

Address

Rx Only:

By prescription only. U.S. Federal Law

restricts this device to sale on order of a

physician only.

Summary of Contents for UST-9120





























































Search results

Summary of Contents for UST-9120

Reviews:

Related manuals for UST-9120

Brands by name

Popular brands

Hitachi UST-9120, Instruction Manual

Search results

Summary of Contents for UST-9120

Reviews:

Related manuals for UST-9120

Brands by name

Popular brands