- 21 -
CHAPTER 4
CONNECTION OF OTHER DEVICES ON
“INTERACTIVE BOARD” AND SOUND You can
increase the efficiency of your device, you can connect
other peripheral devices on the “INTERACTIVE
BOARD”. Please read the instruction manuals of these
peripheral units provided by their manufacturers while
using them. In this section, installation of the following
devices is described:
• USB Devices
Connecting the USB devices
• “INTERACTIVE BOARD” has 2 USB2.0 and 2 UB3.0
input for USB devices as keyboard, mouse, printer,
scanner, digital camera, etc.
•
USB (Universal Serial Bus) is developed for
industrial standard computers. It supports Pnp
(Plug and Play) technology; so you do not need to
close “INTERACTIVE BOARD” while connecting or
disconnecting the USB devices.
Updating of internal devices
If you want to change the temporary memory (RAM)
module on your “INTERACTIVE BOARD”, to prevent a
potential malfunction in computer, please contact with
technical department for details. Please do not change
any parts without getting help from a professional.
These transactions should be realized by service
centre.
Usage of External Sources with Interactive
Board (HDMI-VGA)
When you want to use the external sources with
Interactive Board, please ensure that the connections
are made as defined in the manual.
• Plug the cable of the desired external device (HDMI1
– HDMI2 – VGA).
• Plug the USB cable transferring the touch screen
feature to external source.
Note:
To connect via VGA, do not forget to plug the external
source cable transferring the audio function of source to the
Interactive Board.
Please be sure that you have transferred the image
of the external source to Interactive Board.
In settings of the screen features of your external
source, in the section about displaying options;
There are double image (displaying the external
source image on both Interactive Board and external
source) and single image options. (Displaying on only
external device or Interactive Board)
Choose the Internal Board as single display device via
the screen features of the connected external source.
Displaying the transferred image on only Interactive
Board will provide you the best solution.
To use external source, to plug the Interactive Board
is enough. You can use external sources without
connecting the Embedded PC. Your device will detect
the transferred external source automatically.
If you connect the external source to Interactive Board
while the Embedded PC is active, your device will not
detect the external source automatically.
To pass to external source, press the source selection
button shown as “
”.
Mic and Audio in “INTERACTIVE
BOARD”
Important!
Before using the mic function of “INTERACTIVE
BOARD”, please be sure that mic driver given with the
device is installed. In case of any sound distortions
during recording, please decrease microphone
volume.
The mic function of the “INTERACTIVE BOARD”
includes below:
- Digital audio and analogue mixer support
- Realtek High Definition sound codec support
- Sound control via function buttons
The methods of playing and recording sound depend
on the operating system in use. Please refer to the
instructions in your operating systems support points
for these methods.
