- 11 -
CONNECTING PERIPHERAL
EQUIPMENT
1
6
2
3
4
5
Caution!
• Be sure to disconnect the plug from the power
outlet before connecting/disconnecting cables. Also,
read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal
with the output terminal when connecting cables.
Accidentally reversing cables connected to the input
and output terminals may cause malfunctions and
the other problems.
• Do not use any cable that has a damaged or
deformed terminal. Using such cables may cause
malfunctions.
Tips
• Wait product to search and find the source auto
-
matically when the product is used for the first time.
The screen is adjusted automatically.
1. AC Input Terminal
• Use only the power cord supplied with the product.
2. RS-232 Input Terminal
• You can control the product from a PC by connect-
ing a commercially available RS-232 straight cable
between these terminals and the PC.
3. Line In/Out Terminals
• Use an audio cable without resistance for Line In
and Line Out terminals.
• Line In:
Connect an external audio device to
record or manipulate the incoming sound data.
• Line Out:
Connect external speakers (Surround
System).
7. VGA Input Terminal
• Use a commercially available VGA cable
• Use Source Select button (11 Source Select But-
ton) to set mode as a VGA.
8. USB B-Type Input Terminal
• Use USB B-Type connector for the external PC
and touch screen connection.
9. HDMI input terminal x 2
• Use a commercially available HDMI cable (con-
forming to the HDMI standard).
• Use Source Select button (11 Source Select But-
ton) to set mode as an HDMI.
Tips
• The length of the signal cables or surrounding
environment may affect the image quality.
Connecting The Power Cord
Caution!
• Use only the power cord supplied with the product.
• Plug the power cord (supplied) into the AC input
terminal.
TURNING POWER ON/OFF
Press the power button
(button “ ” on device or
power button on Remote controller)
to turn the
power ON/OFF.
Caution!
• When use POWER button to turn product off and
back on, always wait for power LED is ON. Product
can be turned back on safely after seeing power
LED is ON.
A short interval may result in a malfunction.
• For a complete electrical disconnection, pull out
the main power plug.
