Hitachi U-2810 Instruction Manual Download Page 3

Page: 3 / 63

IMPORTANT - 1

IMPORTANT

PRECAUTIONS ON ELECTROMAGNETIC WAVE

PRECAUTIONS ON ELECTROMAGNETIC WAVE INTERFERENCE

INTERFERENCE

1. Possible E

Possible Electromagnetic

lectromagnetic Wave

Wave Interference

Interference Caused

Caused by This

by This Instrument

Instrument

When this instrument is used in a residential area or an adjacent

When this instrument is used in a residential area or an adjacent
area thereto, it may

area thereto, it may cause interference to radio and television

cause interference to radio and television

reception.

reception.
To prevent this, use

To prevent this, use the specified system connection cables in

the specified system connection cables in

strict

strict accordance

accordance with

with the i

the instruction

nstruction manual.

manual. The

The instrument

instrument is

designed to minimize possible electromagnetic wave

designed to minimize possible electromagnetic wave
interference caused by it if

interference caused by it if the specified cables are connected

the specified cables are connected

properly.

properly.
However, there is no guarantee that electromagnetic wave

However, there is no guarantee that electromagnetic wave
interference

interference will

will not be

not be caused

caused by the

by the instrument.

instrument. If the

If the

instrument does cause interference to radio or

instrument does cause interference to radio or television

television

reception, which can be determined by turning off

reception, which can be determined by turning off and on the

and on the

instrument, the user is encouraged to try to correct the

instrument, the user is encouraged to try to correct the
interference by one or more

interference by one or more of the following measures:

of the following measures:

•

Increase s

Increase separation

eparation between

between the ins

the instrument an

trument and radio

d radio/TV

/TV

receiver.

•

Connect the

Connect the instrument to

instrument to an outlet

an outlet on a c

on a circuit differen

ircuit different from

t from

that to which the radio/TV receiver is connected.

2. Possible

Possible Electromagnetic

Electromagnetic Wave

Wave Interference

Interference Affecting

Affecting This

This Instrument

Instrument

If this instrument is used near an intense electromagnetic source,

If this instrument is used near an intense electromagnetic source,
interference noise may be given to t

interference noise may be given to the instrument to incur an

he instrument to incur an

adverse effect on its

adverse effect on its performance or functionality.

performance or functionality.

To prevent this, use

To prevent this, use the specified system connection cables in

the specified system connection cables in

strict

strict accordance

accordance with

with the i

the instruction

nstruction manual.

manual. The

The instrument

instrument is

designed to minimize possible electromagnetic wave

designed to minimize possible electromagnetic wave
interference affecting it if

interference affecting it if the specified cables are connected

the specified cables are connected

properly.

properly.
However, there is no guarantee that electromagnetic wave

However, there is no guarantee that electromagnetic wave
interference

interference will

will not occ

not occur in

ur in this in

this instrument.

strument. If the

If the instrument

instrument

does incur electromagnetic wave interference, which can

does incur electromagnetic wave interference, which can be

determined by turning on and off

determined by turning on and off possible sources of

possible sources of

electromagn

electromagnetic wave interference nearby,

etic wave interference nearby, the user

the user is

encouraged to try to correct the interference by one or more of

encouraged to try to correct the interference by one or more of
the following measures:

the following measures:

Summary of Contents for U-2810
































































Search results

Summary of Contents for U-2810

Reviews:

Related manuals for U-2810

Brands by name

Popular brands

Hitachi U-2810, Instruction Manual

Search results

Summary of Contents for U-2810

Reviews:

Related manuals for U-2810

Brands by name

Popular brands