Chapter 1 Introduction
1.1 Outline
This operator is series of SJ300/L300P and it has a 16 characters x 2 lines liquid crystal
display. This operator enable monitor data setting, data read setting copy also it can use
former operator if which can use DOP/DRW. (but function is restricted.)
1.2
Applicable Inverter Models
UNIT DISPLAY
Attach to the
inverter
Remark
SJ300,L300P series
16characters
×
2 lines
Possible
SJ100,L100,J300,L300
,
J100,J200,JH300,J500
,
L50 series
16characters
×
2 lines
(Display to the top row)
Impossible Left
side
moving
function key and
remote
function
key are invalid
This operator can use the inverter if which can use DOP/DRW.
《
NOTE
》
It is necessary to change the operation mode of remote operator, when
the Inverter type is not SJ300/L300P series. Because initial value of the
operation mode is the value for SJ300/L300P.(Refer to 6 chapter)
1.3
Inspection upon unpacking
Please don’t shake the product when you open the package. Make sure that the product is the
one you orderd and there was no damage (injury,falling or dents in the body) during
transpotation of the unit.
Content of package
1. Main body of remote operator :1
2. Instruction manual
:1
If you have any questions please contact your supplier or the local Hitachi Distributor with
the following information.
