Hitachi SJ/L-EN Ethernet Communications Module, Instruction Manual

Page: 21 / 36

Appendix
Page 21 of 36
Appendix – Parameter List
Note: Parameters in BOLDFACE can be edited while inverter is in the RUN mode. “RO” means the
parameter is Read Only, and “R/W” means the value can be read or written. Please refer to page 32 for
a key to other symbols used in these tables.
Inverter
Parameter
Modbus
Start
Address
Modbus
End
Address
Parameter Name Magnitude
Read/
Write
Data Range
D – Monitoring Functions
L200/SJ200 X10 0 – 4000
D001 3001 3002
Output frequency
monitor
L100/SJ100 X100
RO
0 - 36000
L200/SJ200 X10 0 – 2000
D002 3003 3004
Output current
monitor
L100/SJ100 X10
RO
0 – 65535
D003 3005 3006 Rotation direction monitor X1 RO 0 – 2
D004 3007 3008
Process Variable (PV) PID
feedback monitor
X100 RO 0 – 999900
D005 3009 3010 Intelligent input terminal status X1 RO 0 – 65535
D006 3011 3012 Intelligent output terminal status X1 RO 0 – 65535
L200/SJ200 0 – 999900
D007 3013 3014
Scaled output
frequency
monitor
L100/SJ100
X1000 RO
0 – 356400
D080
‡§
3159 3160 Trip counter X1 RO 0 – 65535
D081
§
3161 3162 Error Code of Trip 1 X1 RO 0 – 255
D082
§
3163 3164 Error Code of Trip2 X1 RO 0 – 255
D083
§
3165 3166 Error Code of Trip 3 X1 RO 0 – 255
D100 3199 3200
Output Frequency Setting by using
Volume of the Inverter
X100 RO 0-36000
D101
‡
3201 3202
Output Frequency Monitor
(L100/SJ100 ONLY)
X100 RO 0 – 36000
D102
‡
3203 3204
Frequency Setpoint (L100/SJ100
ONLY)
X100 RO 1 – 36000
D107
‡§
3211 3212 MCU Version X1 RO 0 – 65535