Hitachi RZ-W2000YH, Operating Instructions Manual

Page: 12 / 31

Rice Cooking using the Timer Rice Cooking with Soaking
(Soak rice before cooking it)
ATTENTION
Ex: Setting “TIMER1” to “7:30” Ex: When soaking for “60 min” before cooking
1
1
3
2 1
P.14
3
3
2
2
Do not use the soaking rice cooking for “MIX”.
(The quality of the added ingredients could
decline or they could sink into the rice.)
Pressing the “1-2person”
button for 3 seconds when
setting the time will return
“TIMER1” to “6:00” and
“TIMER2” to “18:00”.
●
The set time is remembered.
●
To cancel the soaking, press
the “CANCEL” button.
P.18-21
P.24
P.18-21
Lights
up
1 2 3
●
The timer can be set to “TIMER1” or “TIMER2”. Upon factory shipment, “TIMER1” is set to “6:00” and “TIMER2” is set to
“18:00”.
●
The timer time is the time when the cooking will finish.
●
If the set time is near the current time, cooking will begin right away. (“TIMER” lamp does not light up.)
●
Do not use the timer for “MIX”.
(The quality of the added ingredients could
decline or they could sink into the rice.)
●
As a guideline, the timer is set within 12
hours.
Check the current time and
adjust if incorrect.
After selecting the rice type and cooking
method, press to make “TIMER1”
light up.
●
The lit up item changes each time the button is pressed.
Press and to set the cooking
completion time to “7:30”.
●
The time changes each time the button is pressed.
rDIBOHFTJOJODSFNFOUTPGIPVSBOE
changes in increments of 10 minute.
r$POUJOVFQSFTTJOHUPTQFFEVQUIFJODSFNFOUBMDIBOHF
Press .
The timer is set when the buzzer
sounds.
●
The “COOK” lamp turns off and the “TIMER” lamp
turns on.
The melody (buzzer) sounds and
cooking ends.
Keep Warm starts automatically.
●
The “STEAM WARM” lamp lights up.
●
How to select the rice and
cooking method
●
The time set upon factory
default setting or the previously
set time is displayed.
●
If the lid is not closed
properly, “ ” will be
displayed.
Make sure to close the lid
properly.
●
The “TIMER2” buzzer
sound is Beep-Beeeeeep.
●
The set time is remembered.
●
To cancel rice cooking timer,
press the “CANCEL” button.
●
For the Keep Warm
program
●
Upon factory shipment, the soaking time is set to 30 minutes.
●
This controls the temperature during soaking depending on the soaking time, and then starts cooking after the rice
absorbs water sufficiently.
●
The recommended guideline is 30 minutes in summer and 60 minutes in winter.
●
Soaking cannot be combined with rice cooking timer.
ATTENTION
●
How to select the rice and
cooking method
●
The time set upon factory
default setting or the previously
set time is displayed.
●
If the lid is not closed
properly, “ ” will be
displayed.
Make sure to close the lid
properly.
P.24
●
For the Keep Warm
program
After selecting the rice type and cooking
method, press to make the
soaking time (ex: 30 min) light up.
●
The lit up item changes each time the button is pressed.
Press and select “60” for the
soaking time.
●
The time changes each time the button is pressed.
Press .
When the buzzer sound is Beep, Beep,
Beeeeeep, the soak rice cooking starts.
●
The “COOK” lamp turns off and the “TIMER” lamp
turns on.
The melody (buzzer) sounds and
cooking ends.
Keep Warm starts automatically.
●
The “STEAM WARM” lamp lights up.
Stir and loosen the rice when
cooking is completed.
(Set the timer to finish
cooking when you want to eat)
Lights
up
Lights
up
Cooking completion time
This shows the time
when cooking will be
completed.
Soaking time
Lights up
Turns off
Flashes
Flashes
Lights up
Turns off
This shows the
remaining soaking
time before cooking
starts in minutes.
Lights
up
22 23
The example shows when
“WHITE” and “NORMAL”
are selected. The example shows when
“WHITE” and “NORMAL”
are selected.