Hitachi RAM-36NP2A, Service Manual, Page: 67 / 87

– 78 –
OTHERS
Q15
A15
Q16
A16
Q17 A17
Q18 A18
Q19
A19
The indoor fan varies among
high air
fl ow, low air fl ow and
breeze in the auto fan speed
mode. (Heating operation)
This is because the cool
wind prevention function
is operating, and does
not indicate a fault.
The heat exchanger temperature
is sensed in the auto speed mode.
When the temperature is low, the
fan speed varies among high air
fl ow, low air fl ow and breeze.
Loud noise from the outdoor unit is
heard when operation is started.
When operation is started, the compressor
rotation speed goes to maximum to increase the
heating or cooling capability, so noise becomes
slightly louder. This does not indicate a fault.
Noise from the outdoor unit
occasionally changes.
The compressor rotation speed changes according to
the difference between the thermostat set temperature
and room temperature. This does not indicate a fault.
There is a difference between the set
temperature and room temperature.
There may be a difference between the set
temperature and room temperature because of
construction of room, air current, etc. Set the
temperature at a comfortable for the space.
Air does not fl ow immediately
after operation is started.
Preliminary operation is performed for one
minute when the power switch on and heating
or dehumidifying is set. The operation lamp
blinks during this time for heating. This does
not indicate a fault.