manualshive.com logo in svg

Hitachi RAM-36NP2A, Service Manual, Page: 39 / 87

Share
Download
Hitachi RAM-36NP2A Service Manual Download Page 39

– 37 –

Step 3: Copy and cancel the reservation schedule.

■

  How to delete WEEKLY TIMER data.

[Delete one program number reservation]

1.  Press 

 (WEEKLY) button to select Mode A or Mode B.

2.  Press 

 (WEEKLY) button for 3 seconds to start editing the reserva-

tion schedule.

3.  Press 

 (DAY) button to select a day of the week to edit.

4.  Press 

 to select program number. Selected program number will 

blink.

5.  Press 

 (DELETE) button.  Reservation of selected program number 

is deleted.

6. After deleting, press 

 (SEND) button while directing the remote 

controller towards the indoor unit for about 3 seconds. Timer lamp on the 
indoor unit will blink rapidly.

     After beep sound emitted from indoor unit, TIMER lamp will light up. 

     Please ensure that the TIMER lamp lights up.

●

 

Reservation will not change if 

 (SEND) button is not pressed.

1

2

3

4

5

6

WEEKLY TIMER OPERATION

Summary of Contents for RAM-36NP2A
























































































Reviews:

No comments