manualshive.com logo in svg

Hitachi RAM-36NP2A, Service Manual, Page: 28 / 87

Share
Download
Hitachi RAM-36NP2A Service Manual Download Page 28

– 26 –

SILENT OPERATION

●

   By  pressing 

 (SILENT) button during AUTO, HEATING, DEHUMIDIFYING, COOLING or FAN 

operation, the fan speed will change to ultra slow.

■

 

To start SILENT operation

■

 

To cancel SILENT operation

● 

Press 

 (SILENT) button during operation.

  

“ 

 ” is displayed on the LCD. Fan speed will be ultra slow.

●

   Press 

 (START/STOP) button. Or

●

   Press 

 (SILENT) button again or 

 (FAN SPEED) 

button.

     Fan speed will return to previous fan speed before SILENT 

operation starts. 

 

SILENT operation stops.

 

“ 

”  disappears from the LCD.  

1

NOTE

●

  When POWERFUL operation is selected, SILENT operation is cancelled. Fan speed will return to 

previous fan speed before SILENT operation.

●

  After auto restart, SILENT operation is cancelled. Fan speed will return to previous fan speed before 

SILENT operation.

●

  During any operation with fan speed 

 (SILENT), if press 

 (SILENT) button, fan speed will 

not change.

Summary of Contents for RAM-36NP2A
























































































Reviews:

No comments