Hitachi RAC-25NX2 Service Manual Download Page 16

Page: 16 / 151

– 13 –

ENGLISH

DEUTSCH

FRANÇAIS

ALIANO

ANISH

POR

TUGUÊS

∂ÏÏËÓÈÎ¿

РУССКИЙ

Point the signal window of the remote controller toward the indoor unit, and

press the (RESERVE) button.

The

(ON) mark starts lighting instead of flashing and the

(RESERVED)

sign lights. A beep occurs and the

(TIMER) lamp lights on the indoor unit.

Set the turn-on time with the

TIMER control button.

Example:
The device will automatically turn on earlier so that
the preset temperature can be reached at 7:00a.m.
The setting of the turn-on time is now complete.

Set the turn-on time with the

TIMER control button.

Example:
The device will turn off at 10:30p.m. and then
automatically turn on earlier so that the preset
temperature can be reached at 7:00a.m.
The settings of the turn-on/off times are now
complete.

Point the signal window of the remote controller toward the indoor unit, and

press the (RESERVE) button.

The

(ON) mark starts lighting instead of flashing and the

(RESERVED) sign

lights. A beep occurs and the

(TIMER) lamp lights on the indoor unit.

•

The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the current time
at first because it serves as a reference.

•

As the time settings are stored in memory in the remote controller, you only have to press the (RESERVE)
button is order to use the same settings next time.

Example: The current time is 1:30p.m.

• The time indication will disappear automatically in 10

seconds.

• To check the current time setting, press the

(TIME)

button twice.
The setting of the current time is now complete.

Press the

(TIME) button

again. The time indication starts
lighting instead of flashing.

Set the turn-off time with the

TIMER control button.

Point the signal window of the remote controller toward the indoor unit, and

press the (RESERVE) button.
The

(OFF) mark starts lighting instead of flashing and the

(RESERVED)

sign lights. A beep occurs and the

(TIMER) lamp lights on the indoor unit.

Example: The device will turn off at 11:00p.m.
The setting of turn-off time is now complete.

Set the current time with

the TIMER control button.

– 12 –

Stop

Start

HOW TO SET THE TIMER

TIME
(current time)

OFF TIMER
ON TIMER

RESERVE

CANCEL

Set the

(TIME) button.

Press the

(OFF-TIMER)

button. The

(OFF) mark blinks on

the display.

After you change the
batteries;

You can set the device to turn off at
the present time.

Press the

(ON-TIMER) button.

The

(ON) mark blinks on the

display.

The device will turn on at the
designated times.

Press the

(OFF-TIMER) button
so that the

(OFF)

mark blinks.

Set the turn-off time with

the TIMER control button.
Press the (RESERVE)
button.

Press the

(ON-

TIMER) button so that the

(OFF) mark lights and

the

(ON) mark blinks.

• The device will turn on (off) and

off (on) at the designated times.

• The switching occurs first at the

preset time that comes earlier.

• The arrow mark appearing on the

display indicates the sequence of
switching operations.

How to Cancel Reservation

Point the signal window of the remote controller toward the indoor unit, and press the (CANCEL)
button.
The (RESERVED) sign goes out with a beep and the (TIMER) lamp turns off on the indoor unit.

NOTE

You can set only one of the OFF-timer,
ON-timer and ON/OFF-timer.

Start

Stop

AM
PM

Stop

Start

ON-Timer

OFF-Timer

Time

ON/OFF-Timer