〈
INDOOR UNIT
〉
MODEL RAS-10JH1, RAS-14JH1
PROCEDURE FOR DISASSEMBLY AND REASSEMBLY
1. Front Panel, Air Purifying Unit
2. Top Grill, Front Cover
(1) Hold both sides of the front panel and lift up.
(1) Lift up while pressing the top grill and remove from tab. (3
places: left, center and right)
(2) Pull forward.
(3) Remove the front panel, pre-filter, air purifying unit, top
grill and exhaust pre-filter.
(4) Remove the screw cover at the bottom of the front cover
and remove the screw.
(5) Remove the center tab of the front cover (1 place).
(6) Place your hands on both sides of the front cover and
remove while pulling in the direction of the arrow.
(2) When the front panel is fully opened with both hands,
push the right arm to the inside to release it, and while
closing the front panel slightly, put it out forward.
(3) Pull out the pre-filters on the right and left.
(4) Remove the air purifying unit (2 pieces) by pulling out
while pushing up with both hands.
Front panel
Front panel
Arm
Pre-filter
Remove the air purifying unit
Push and lift
Push and lift
Push and lift
Pull out
Pull out
Pull out
Remove from tab
Screw
Screw
Screw cover
Screw cover
(Rear of Exhaust
Pre-filter)
Remove the center tab
- 102 -
