5 SETUP AND OPERATIONS
5-6
③
Defaults
Transfer areas: None (Receiving only)
Hold/clear: Clear
To change the settings, follow these instructions:
• To set a transfer area
Uncheck the “Receiving only” check box by clicking it and enter the starting address and the
ending address into the left-side and right-side boxes of the transfer area, respectively.
• To change the clear/hold setting to “Hold”
Click the “Hold” radio button.
Figure 5-4 shows a sample transfer area setting of G100 to G1FF, with a clear/hold setting of
“Hold.”
Figure 5-4 Change Capacity Dialog Box (Updated)
④
Click the OK button.
The setup is now completed.
Transfer area setup changed here
Clear/Hold setting changed here
Summary of Contents for LQE050
